The body is made of 1.60 mm curled up in one piece of iron sheet, given form with pressed and strength has been increased. Bottom corners are radius. Installation of manufactured from the same sheet with the body iron sheets, pressing the edges of the side iron sheets formed of at least 20 mm. width can twisted ledge or lip including all surroundings and radius, with this protrusion the side iron sheets and body sheets are uninterrupted merged from outboard with radius.

The body mouth size of 30x50x2.50 mm been assemblied in to internal ‘U’ profile.

 

The lifting trunnions are made suitable  for EN standard and size of 2.50 mm. by welding on the sheet apparatus bolted to the body

 

The lid is manufactured from a single piece of 1.20 mm. thick iron sheet by being laminated in presser and reinforcedas an shape the sides being completely closed. 

 

There are 4 carrying rollers with the size of 200x50 and wide fork,swivel 360, two of them are with brakes,fork sheet is 4 mm.Wheels are settled which are suitable to the standards of TS EN 12532. Thickness of the Wheel mounting bracket is 4 mm.

 

Containers all inside and outside included lid galvanized in accordance with the standard of TS EN ISO 1461 with the system of hot dipping galvanization.

 

The container has the certificate of TS EN 840-3.