400 Liter Hot Dip Galvanized Metal Waste Container

400 Liter Hot Dip Galvanized Metal Waste Container

Product Code :

Category : Metal Waste Container

400 Liter Hot Dip Galvanized Metal Waste Container


The body is made of 2.00 mm. curled up in one piece of  iron sheet ,given form with pressed and strength has been increased.Bottom corners and top are radius. Installation of manufactured from the same sheet with the body iron sheets, pressing the edges of the side iron sheets  formed of at least 15 mm. width can twisted ledge or lip including all surroundings and radius,  with this protrusion the side iron sheets and body sheets  are uninterrupted merged from outboard with radius .

The body source and the other  sources made by the technique of gaseous with dross-free, uninterrupted by boiling and were made in closed water the body.

The lifting trunnions are 4.00 mm. and they are welded to the body with reinforcement.At sides carrying handles are existed.

Container lids are made of 1.50 mm. iron sheet, lid  system  is made can be opening  around its axis and to lid are  given strengthening form.Opening handles on the lid,locked with osculation, reinforced with resistance increasing profile from inside.

Opening of the body 25.00 x50.00x2.00 mm. of size, body and side iron sheets are frame as self- bent. There are no source in the mouth outside corner joints. Profile of the bottom were made method welding.

There are 4 carrying rollers with the size of 150 x45 mm. two of, swivel 360, two of them are fixed and fork sheet is 3.00 mm.Wheels are settled which are suitable to the standards of TS EN 12532. Thickness of the Wheel mounting bracket is 3.00 mm.

Containers all inside and outside included lid minimum  an average 70 micron  coating thickness galvanized in accordance with the standard of TS EN ISO 1461 with the system of hot dipping galvanization.

In the front side; the name of the municipality , a drawing which shows a person throwing garbage and the slogan ‘Keep Clean Our Environment’are applied.

The container has the certificate of TS EN 840-2.